HyLoft 01000 Manual de instrucciones descargar pdf (Pagina 3)

Approximate Assembly Time: 30 minutes or less

MOUNTING THE MASTER RAILS

TO WALL STUDS

Using a stud nder, locate5wall studs that are 16" center to center apart.

Note: If studs are not on 16" centers, you may need to drill new matching holes in Maste. r Rails.

Place one Master Rail (B) with holes aligned to studs,&verify that Master Rail is. Level.

Mark the location of the holes with a pencil. Pre-drill the holes using a 3/16" (5mm) drill bit.

Mount the Master Rail (B) with3Lag Screws (C) using a 7/16" (11 mm) nut driver or

socket wrench.

IMPORTANT: Master Rails must be mounted with longer ¾ lip on top and shorter ½"

lip on bottom.

Longer

Lip on

Top

Attach 2nd Master Rail (B) by interlocking with 1st and aligning holes with 16" center wall studs.

Verify that both Master Rails are level and mark holes with a pencil. Pre-drill using a 7/16" (11 mm)

3/16" (5 mm) drill bit. Mount the Master Rail (B) with 3 Lag Screws (C) using a 7/16" (11 mm)

nut driver or socket wrench.

Note: If necessary to mount to uncommon hole patterns, drill new matching holes in Master Rails.

16"

32"

64"

48"

1 2 3 4 5 6 7 8 ... 11 12

Sin comentarios

HyLoft 01000 Manual de instrucciones Pagina 3